Apparel
CHEVY 5.3L LS/L83
Valves Pistons Crankshafts / Rotating Assemblies

Manley Performance is proud to introduce our new line of "PRO SERIES" crankshafts specifically designed for the CHEVROLET LS market...The perfect compliment to our existing product range of LS pistons and connecting rods. Why shop anywhere else when you can bullet-proof your LS engine’s bottom-end with quality Manley components?
  • Lightweight (LW)
  • 4340 material forgings
  • Multi-step heat treatment process and Nitrided for added strength
  • Stress relieved, shot-peened, and magnafluxed
  • Micro polished large radius journals (narrowed bearings required)
  • Available with either 24 or 58 tooth reluctor wheel
  • Gun drilled mains and lightened rod journals for weight reduction
  • Counterweights fully profiled
P/N Design
LW
Reluctor Wheel
24 or 58
tooth
Stroke Min
Rod
Length
Main
Journal
Diameter
Rod
Journal
Diameter
Bob
Weight
(grams)
Total
Weight
(lbs)
  LIGHTWEIGHT
193924 LW 24 3.622" 6.098" 2.559" 2.100" 1800 51-53
193958 LW 58 3.622" 6.098" 2.559" 2.100" 1800 51-53
Note: Manley crankshafts are not intended for use with highly boosted roots style cog belt superchargers



With the introduction of our outstanding new line of Pro Series LS crankshafts, we have the ability to offer our customers complete rotating assemblies utilizing Manley Platinum Series pistons and Manley H-Beam or Pro Series I-Beam connecting rods.

Ordering a Manley LS rotating assembly is as easy as 1-2-3.....

      1. Choose your crankshaft part number based on stroke, weight, and reluctor wheel and then order the corresponding rod and main bearing part numbers shown.
      2. Choose your connecting rod part number.
      3. Choose your piston part number based on bore size and desired compression ratio along with the corresponding piston ring part number.
Ordering all of the required components for your LS rotating assembly from Manley will result in extra $ savings. Please contact your Manley representative for more details. Order P/N 04000 if you require Manley to perform balancing.
CRANKS
  • Super Lightweight and Lightweight 4340 material forgings
  • Multi-step heat treatment process and Nitrided for added strength
  • Stress relieved, shot-peened, and 100% magnafluxed
  • Micro polished large radius journals
  • Available with either 24 or 58 tooth reluctor wheels
  • Gun drilled mains and lightened rod journals for weight reduction
  • Counterweights fully profiled

RODS

  • Lightweight design 4340 material forgings
  • Fully machined, heat treated, stress relieved, shot peened, and 100% magnafluxed
  • Big and small end bores are final honed to a tolerance of ± .0002"
  • Bend and twist is tightly controlled
  • Weight matched to +/- 1.5 grams
  • H-Lite comes standard with 3/8" ARP 2000 bolts
  • H-Beam comes standard with low profile 7/16" ARP 8740 bolts providing additional block and oil pan clearance (affix an R for ARP 2000 bolt upgrade)
  • H-Tuff comes standard with low profile 7/16" ARP 2000 Bolts
  • I-Beam comes standard with 7/16" ARP 2000 bolts (affix an R6 suffix for ARP 625+ bolt upgrade)
PISTONS
  • High strength 2618 alloy forgings
  • Exacting ring groove squareness to cylinder wall provides maximum horsepower.
  • Offset wrist pin design
  • Premium Chrome Moly pin included with Standard Series
  • 9310 Alloy pin included with Extreme Duty Series
  • Moly coated skirts

RINGS

  • 1.2 x 1.2 x 3mm x 3mm Total Seal (moly in-lay tops standard)
  • Premium steel top rings are optional (affix ST suffix)
  • Total Seal Gapless® steel top ring sets also available (affix GT suffix)

BEARINGS

  • Premium Clevite® "H" Series narrowed rod bearings and "P" Series main bearings or "H" Series main bearings

Small Block Chevrolet 5.3L LS Gen III/IV
Lightweight 1800gm. Bobweight 3.622" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 58cc 62cc 66cc 70cc 14051-8 15051R-8-8 14559-8
193924
24 Tooth
or
193958
58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
15051R H-Tuff
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 or 30010X*
Rod
&
33030 or 33030H
Main
561005C-8 561005CE-8 3.785/-2cc Flat Top 46500ST-8 10.50 9.99 9.53 9.11 Y Y Y
561010C-8 561010CE-8 3.790/-2cc Flat Top 46510ST-8 10.55 10.03 9.57 9.15 Y Y Y
561020C-8 561020CE-8 3.800/-2cc Flat Top 46520ST-8 10.60 10.08 9.62 9.20 Y Y Y
 










Small Block Chevrolet 5.3L LS Gen III/IV
Lightweight 1800gm. Bobweight 4.000" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 58cc 62cc 66cc 70cc 14051-8 15051R-8 14559-8
192124
24 Tooth
or
192158
58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
15051R H-Tuff
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 or 30010X*
Rod
&
33030 or 33030H
Main
561105C-8 561105CE-8 3.785/-7cc Dish 46500ST-8 10.82 10.32 9.87 9.46 Y Y Y
561110C-8 561110CE-8 3.790/-7cc Dish 46510ST-8 10.87 10.37 9.92 9.51 Y Y Y
561120C-8 561120CE-8 3.800/-7cc Dish 46520ST-8 10.92 10.42 9.96 9.55 Y Y Y
 










Small Block Chevrolet 5.3L L83 Gen V Direct Injected
Lightweight 1850gm. Bobweight 3.622" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 60cc 14051-8 15051R-8 14559-8
194158
194358 (Long Snout)
58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
15051R H-Tuff
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 or 30010X*
Rod
&
33110H Main
561200C-8 561200CE-8 3.780/-2cc Dome 46500ST-8 10.26 Y Y Y
561210C-8 561210CE-8 3.790/-2cc Dome 46510ST-8 10.31 Y Y Y
561220C-8 561220CE-8 3.800/-2cc Dome 46520ST-8 10.36 Y Y Y
 











Small Block Chevrolet 5.3L L83 Gen V Direct Injected
Lightweight 1820gm. Bobweight 4.000" Stroke Cranks
Crank P/N Standard Extreme Duty Compression Ratio Balance Req. (Y/N)
Reluctor Wheel Part No. Part No. Piston Description RingPart No. 60cc 14051-8 15051R-8 14559-8
194258
194458 (Long Snout)
58 Tooth
6.125" Rod P/N
Description
14051-8 H-Beam
or
15051R H-Tuff
or
14559-8 SW I-Beam
Bearing P/N
Description
30010 or 30010X*
Rod
&
33110H Main
561300C-8 561300CE-8 3.780/-10cc Dish 46500ST-8 10.20 Y Y Y
561310C-8 561310CE-8 3.790/-10cc Dish 46510ST-8 10.25 Y Y Y
561320C-8 561320CE-8 3.800/-10cc Dish 46520ST-8 10.30 Y Y Y
 










Note: "SW" = "Standard Weight" design rod
* HX Series rod bearings with .001" extra clearance
© 2020 Manley Performance Products, Inc.
sales@manleyperformance.com  |  Terms and Conditions  |  Prop 65